Smok Mag P3 Kit

£65.00

SKU: 103 Categories: ,

Description

Firing at up to 230 power watts, the Smok Mag P3 is powered by two 18650 batteries (available here). The gun style grips fits neatly into the hand and features a sensitive fire button with flash firing functionality (0.001s firing speed).

This is a striking, eye-catching device beautifully completed with a carbon fibre back-panel. With these looks comes some serious protection – the Mag P3 is dustproof, shockproof and waterproof, built to withstand water immersion of between 15 cm and 1 meter for up to 30 minutes.

The Smok Mag boasts a whole suite of features which enable you to customise your device and vape to perfection, which can be set using the 1.9inch responsive touch screen. In variable wattage mode you can choose between three vape styles, soft, medium and hard, while in temperature control mode you can select the type of coil, adjust pre-heat wattage and set TCR values.

You also have a number of security features available, with the ability to use a passcode, and swipe to unlock to protect against accidental activation in your pocket. Additional customisation options include puff counters, setting a maximum puff limit, adjusting the screen colour and more (see features below for a full list).

As you’d expect with an advanced device like this, the P3 comes with multiple protections including short circuit protection, over-heating protection, intelligent atomiser protection and more.

The Mag P3 comes with the Smok TFV8 Mini V2 tank included. With large wicking holes, high surface area and low resistance coils, the TFV8 Mini V2 is designed for powerful devices capable of putting out higher power levels and for e-liquids with a high VG ratio. This makes it great for vapers who enjoy direct-to-lung vaping and lots of clouds!

The Mag P3 is compatible with TFV8 Mini V2 coils.

WHO’S THE SMOK MAG P3 FOR?

The Smok Mag is ideal for vapers who are looking for an advanced, customisable device perfect for direct-to-lung vaping and capable of producing huge clouds of vapour.

COMPATIBLE COILS

The Smok Mag P3 works with Mini V2 coils.

FEATURES

  • Waterproof, dustproof, shockproof
  • Huge power range – 1-230 watts
  • Dual battery indicator
  • Variable wattage
  • Temperature control
  • Temperature Coefficient Resistence
  • Responsive touch screen
  • Vaping effects: soft/norm/hard
  • Puff settings
  • System settings
  • Set screen colour
  • Set screen timeout
  • Updatable IQM chip
  • Passcode (optional) and passcode reset
  • Flash fire speed up to 0.001s
  • Slide to unlock (optional)
  • Stealth mode (turns off display)
  • Trigger style fire button
  • Carbon fibre panel
  • Puff counter
  • Slide to unlock
  • Passcode
  • Delicate fire button

 

PROTECTIONS

  • Intelligent atomiser protection
  • Puff monitoring system
  • 10 second cut off
  • Short circuit protection
  • Over heating protection
  • Low battery warning

 

WATTAGE GUIDELINES

A1 0.17ohm coil: 90-140 Watts
A2 0.2ohm Double Coil: 70-120 Watts
A3 0.15ohm Triple Coil: 80-130 Watts

SPECS

MAG P3 MOD

  • Height: 91.6mm
  • Width: 72.3mm
  • Depth: 36mm
  • Weight: 261.5g
  • Standby current <400uA
  • Power range: 1-230 watts in variable wattage/10-230 watts in temperature control
  • Input voltage: 6.4-8.4v
  • Charging voltage: 5w
  • Charging current: 1.8A
  • Firing speed: 0.001 seconds
  • Resistance range: 0.1-2.5 ohms (vw mode), 0.05-2 ohms (TC mode)
  • Temperature range: 200-600F, 100-315C

 

TFV8 MINI V2

The specs below are for the EU version.

  • Capacity: 2ml
  • Height: 54mm
  • Diameter: 25.4mm
  • Weight: 65g
  • Coil material: Stainless steel

Additional information

Battery

With Battery, Without Battery

Colour

Red, White, Blue, Purple, Gold, Silver, Green

Reviews

There are no reviews yet.

Be the first to review “Smok Mag P3 Kit”

Your email address will not be published. Required fields are marked *